Epoque Baforce Controller - Bending Wave USA

The flagship product Epoque Baforce Controller sets the ultimate benchmark for active subwoofer crossovers / controllers.

The Epoque Baforce Controller is the choice for the ultimate sub-bass reproduction. In order to achieve a maximum sound quality, resolution and velocity without any looses, we designed our Epoque Baforce Controller completely analog. Our supreme design goal was, not to hear the crossover / controller in the signal path.

Because of the completely symmetrical design, the Epoque Baforce Controller totally avoids interference’s from the outset and reaches hereby an even higher sound quality.

These completely analog and symmetrical crossover / controller electronics are housed in a non-compromise enclosure which is milled out of a full block of a specific aluminum alloy. Hereby we get perfect control over EMI, heat dispersion, freedom from magnetic interfering fields and an ideal resonance behavior of the complete system.

Additionally the massively oversized discrete power supply always ensures the absolute stable working conditions of our Epoque Baforce Controller, no matter at which level.

Reviews

“
“The sound image was incredibly fast, with high resolution and to a certain extent simply effortless so that the awesome amount of technology immediately just faded into the background and let the music take over.”

Martin Mertens "fairaudio"
“
“Simply unbelievable that so much resolution can be accompanied by such strong tonality and such a rich foundation!”

Dirk Sommer "Hifistatement"
Sample Position

Featured Technologies

Throughout Analog Controller

Our ultimate Epoque Baforce Controller is a highest end active crossover / controller, which is specifically designed completelly analog with the best possible parts available. Only through our completelly analog design you will get the best possible sound quality, resolution and velocity as we hereby have no looses or latancies based on A/D conversion, DSP processing, and D/A conversion.

Completely Symmetrical

Additionally our crossover / controller is designed completely symmetrically, in order to get even more freedom from interferences and therefore an even higher sound quality. Our supreme design goal was, not to hear the crossover / controller in the signal path and we are sure that we reached it!

Massively Oversized Power Supply

The massively oversized high end power supply can shortly deliver few times higher peak current as will need at maximum level. Additionally In order to even lower the interference’s, we designed the enclosure so the power supply has it’s own shielded chamber and doesn’t effect the analog section. Hereby the noise floor is again shifted to the lowest potential possible and even the smallest dynamic impulses will be reproduced with unbelievable velocity and precision.

Totally EMI and resonance proof controller enclosure

Our completely analog and symmetrical crossover / controller electronic is housed in a non-compromise enclosure which is milled out of a full block of a specific aluminum alloy. Hereby we get perfect control over many things. For example avoiding EMI, the ideal heat dispersion, the freedom from magnetic interfering fields, an ideal resonance behavior of the complete system, …

Technical Specifications

Principle

Active Subwoofer Crossover / Controller

Design

Complettely Analog and Symmetrical
2 Outputs for connecting up to 2 Subwoofers simultaneously

Standard finishes

Lacquer anodized in natural silver semi gloss or
Lacquer anodized in space grey semi gloss

Adjustable parameters of the controller

– Level (step less adjustable)
– Low Frequency CUT OFF: 15 Hz – 35 Hz (step less adjustable)
– Low Frequency CUT OFF Q-SELECTION: 0,7 – 4 (step less adjustable)
– High Frequency CUT OFF: 40 Hz – 80 Hz (step less adjustable)
– PHASE: 0°, 180°
– Low Frequency CUT OFF for the MAIN OUT: Linear, 50 Hz, 80Hz

Dimensions

32 cm width x 22 cm depth x 5,4 cm height

Weight

6 Kg without packaging